Powder for laser cladding of brake discs
Laser Cladding Alloy Powder for Brake Discs
430L · FeCrMn · FeCrV three types of alloy steel powders 20–53 μm · Verified by European customers
Why choose Tianjiu brake disc alloy powder?
High sphericity
Prepared by the gas atomization process, the powder exhibits excellent sphericity, with few satellite particles, ensuring smooth powder delivery and a cladding layer free of porosity.
Low oxygen & low impurities
Oxygen content ≤ 0.06%, effectively reducing cladding defects and enhancing interfacial bonding strength and the density of the cladding layer.
Particle size is precisely controllable.
20–53 μm standard range; D10/D50/D90 strictly comply with ISO 13320.
Flexibly customizable ingredients
Supports fine-tuning of ingredient formulations and customized particle sizes (15–45 μm / 45–90 μm), with rapid response to special requirements.
Recommended Product Series
All three powder grades undergo rigorous quality control, with their chemical composition and physical properties specifically optimized for laser cladding processes.
TIJO-430L
| Cr | 16.97% (16-18%) |
| C | 0.014% (≤0.03%) |
| Yes | 0.54% (≤1.0%) |
| O | 0.043% (≤0.06%) |
| D50 | 34.68 μm |
| Loose packing density | 4.07 g/cm³ |
| Liquidity | 15.95 s/50g |
TIJO-FeCrMn
| Cr | 18.92% (18.5-19.5%) |
| Mn | 10.80% (9.5-11.0%) |
| N | 0.34% (0.3-0.4%) |
| C | 0.045% (≤0.08%) |
| D50 | 35.48 μm |
| Loose packing density | 4.09 g/cm³ |
| Liquidity | 15.75 s/50g |
TIJO-FeCrV
| Cr | 21.80% (21.5-22.5%) |
| V | 1.41% (1.3-1.5%) |
| C | 1.91% (1.8-2.0%) |
| Yes | 0.81% (≤1.0%) |
| D50 | 34.33 μm |
| Loose packing density | 4.04 g/cm³ |
| Liquidity | 16.20 s/50g |
Particle Size and Physical Property Comparison
| Grade | D10 (μm) | D50 (μm) | D90 (μm) | Loose packing density (g/cm³) | Tap Density (g/cm³) | Flowability (s/50g) |
|---|---|---|---|---|---|---|
| 430L | 20.57 | 34.68 | 55.92 | 4.07 | 4.64 | 15.95 |
| FeCrMn | 21.08 | 35.48 | 57.48 | 4.09 | 4.59 | 15.75 |
| FeCrV | 20.55 | 34.33 | 56.24 | 4.04 | 4.58 | 16.20 |
* Data are sourced from the batch COA report (2026.03) and support customization to other particle size ranges, such as 15–45 μm / 45–90 μm.
Application Value of Laser Cladding for Brake Discs
Adopt High-speed laser cladding The technology involves fabricating a high-performance alloy layer on the brake disc surface, which significantly enhances wear resistance, high-temperature oxidation resistance, and thermal fatigue resistance. Our powders are specifically engineered for this process, covering all application scenarios—from passenger vehicles to aerospace braking systems. Three grades offer tailored combinations of hardness and toughness to suit different braking conditions, enabling customers to select the most appropriate grade based on vehicle type, braking frequency, and operating temperature.
The cladding layer achieves metallurgical bonding with the substrate, eliminating the risk of delamination and extending service life by 2–3 times. Powder utilization exceeds 95%, delivering significant overall cost advantages, and the technology has been successfully deployed in multiple high-end European brake system projects. Furthermore, Tianjiu provides end-to-end technical support—from powder selection to optimization of laser cladding process parameters—helping customers shorten product development cycles.
Typical application scenarios
High-performance passenger car
Surface hardening of the brake disc, with a hardness of HV 350–600 adjustable to meet varying braking requirements.
Commercial Vehicles/Heavy Trucks
The brake drum’s wear-resistant layer exhibits excellent resistance to thermal cracking, making it well-suited for applications involving frequent, hard braking.
Rail transit
Brake disc hardening layer, resistant to thermal fatigue, with a long service life.
Aircraft braking system
High-temperature stability, thermal shock resistance, and suitability for extreme braking conditions.
End-to-end testing capability
Each batch of powder undergoes comprehensive inspection for composition, particle size, flowability, and oxygen content, with a full‑batch traceable Certificate of Analysis (COA) provided to ensure batch-to-batch consistency and stable laser cladding process performance.
Get Samples & Technical Support
Contact our powder metallurgy engineers to receive free samples and recommendations on laser cladding process parameters.
Recommend products