BNi-1 nickel-based brazing filler metal · Nickel-chromium-boron-silicon alloy brazing powder/paste
High-Temperature Strength · Diffusion Brazing · Specialized for Aircraft Engines/Gas Turbines -200 mesh · -300 mesh · Paste-like
Process Advantages
Excellent high-temperature strength
After age hardening, it exhibits high room-temperature tensile strength and is suitable for a wide temperature range; its brazed joints maintain excellent performance even at elevated temperatures.
High-chromium · Resistant to high-temperature oxidation and corrosion
High chromium content imparts the brazed joint with excellent high-temperature oxidation resistance, creep resistance, and resistance to sulfidation corrosion, as well as superior resistance to acid, alkali, and seawater corrosion.
Diffusion brazing · High remelting temperature
During brazing, carbon and boron diffuse into the base metal, raising the remelting temperature of the braze joint and enabling the joint to withstand long-term service at temperatures close to those of the base material.
Dual-form · Broad process compatibility
Available as -200 mesh/-300 mesh powders and ready-to-use pastes, compatible with a variety of brazing processes including vacuum brazing, protective-atmosphere brazing, dispensing, and screen printing.
Product Real-World Photos & Microscopic Morphology
Powder SEM (-200 mesh)
High sphericity, uniform particle size distribution, and excellent flowability.
Real-life photos of powder/paste products
Gray powder, packaged in vacuum-sealed aluminum foil bags; paste-like formulation, packaged in a syringe.
High-Temperature Alloy Brazed Joint
Turbine blades, combustion chamber components, high-temperature piping
BNi-1 nickel-chromium-boron-silicon alloy brazing filler metal
BNi-1 is a high-performance nickel-based brazing alloy powder in the Ni–Cr–B–Si–Fe–C system. With nickel as the matrix, it leverages chromium to deliver excellent high‑temperature oxidation resistance and corrosion resistance, while boron and silicon act as fluxing elements. During brazing, carbon and boron diffuse into the base metal, raising the remelting temperature of the braze joint and ensuring that the joint maintains superior performance even at elevated temperatures. This filler metal is suitable for a wide temperature range and exhibits outstanding resistance to high‑temperature oxidation, creep, and sulfidation corrosion. After age hardening, its strength is significantly enhanced, with high room‑temperature tensile strength. The product is available in both powder form (−200 mesh, −300 mesh) and paste form, making it compatible with a variety of processes, including vacuum brazing, protective‑atmosphere brazing, SLM, and EBM. It complies with AWS A5.8, AMS 4775, ISO 17672 Ni600, and ISO 3677 B‑Ni73CrFeSiB(C)‑980/1060 standards. It finds extensive application in aerospace engine turbine blades, gas‑turbine high‑temperature piping, nuclear‑industry components, chemical equipment, automotive turbochargers, and the brazing of stainless steel and cemented carbides.
Grade and Standard
| Standard system | Corresponding grade |
|---|---|
| China GB/T | BNi73CrFeSiB(C) |
| US AWS | BNi-1 |
| International ISO | Ni600 |
| Other | BNi74CrSiB |
| Applicable Standards | AWS A5.8/A5.8M, AMS 4775, ISO 17672 Ni600, ISO 3677 B-Ni73CrFeSiB(C)-980/1060 |
* Complies with international multi-standard system requirements and meets the stringent specifications of industries such as aerospace and energy.
Chemical Composition (wt%)
| element | Content range | Note |
|---|---|---|
| Ni | Bal. (≈70–73%) | Matrix element |
| Cr | 13.0-15.0 | Enhance high-temperature oxidation resistance and corrosion resistance. |
| B | 2.75-3.50 | Melting-point-lowering elements promote diffusion. |
| Yes | 4.0-5.0 | Fluxing elements to improve fluidity. |
| Fe | 4.0-5.0 | Improve processability |
| C | 0.6-0.9 | Increase strength |
| P | ≤0.02 | Impurities, strictly controlled |
| S | ≤0.02 | Impurities, strictly controlled |
| Co | ≤0.10 | Impurities |
| Al | ≤0.05 | Impurities |
* Complies with AWS A5.8, AMS 4775, and GB/T 10859 standards. Specific composition shall be subject to the batch inspection report.
Physical Properties & Brazing Temperature
| Parameter | Typical value | Note |
|---|---|---|
| Solidus | 977-980℃ | Onset of melting temperature |
| Liquidus line | 1038-1060℃ | Complete melting temperature |
| Recommended brazing temperature | 1066-1204℃ | The actual temperature is adjusted according to the base material and the process. |
| Powder morphology | Spherical | Non-vacuum atomization process |
| Loose packing density | ≥4.0 g/cm³ | — |
| Oxygen content | ≤0.1% (1000 ppm) | Low oxygen ensures brazing quality. |
| Sphericity | ≥97% | Excellent liquidity |
| Powder specifications | -200 mesh, -300 mesh | Standard supply specifications |
| Tensile strength (brazed joint) | High (after age hardening) | Suitable for high-temperature, high-strength joints. |
Particle Size Specifications & Morphology Selection Guide
| Specification/Format | Granularity/Characteristics | Recommended Process | Typical Applications |
|---|---|---|---|
| -200 mesh | ≤74μm | Vacuum brazing, protective-atmosphere brazing | General-purpose specification, suitable for most brazing applications. |
| -300 mesh | ≤48μm | Precision brazing, paste formulation | Fine-gap joints, brazing of precision components, solder paste raw materials |
| Paste-like | 80–90% alloy powder + binder | Dispensing, screen printing, manual coating | Complex-shaped workpieces, automated welding, on-site maintenance |
* We primarily offer powders in 200-mesh and 300-mesh grades; paste formulations and even finer particle sizes are available upon request. Solder paste viscosity can be adjusted to suit dispensing or printing processes.
Brazing Process Reference
| Process parameters | Recommended value | Explanation |
|---|---|---|
| Brazing temperature | 1066-1204℃ | The actual temperature is adjusted according to the base material and joint gap. |
| Holding time | 5-30 min | Adjust according to workpiece dimensions and furnace loading capacity. |
| Protective atmosphere | Vacuum (≤10⁻² Pa) or high-purity argon/hydrogen gas | The dew point of hydrogen must be below −50°C, and that of argon must be below −60°C. |
| Cooling method | Furnace cooling or gas quenching | — |
* The brazing temperature should not be too high to avoid excessive diffusion that could lead to dissolution of the base metal. During brazing, boron diffuses into the base metal, which can raise the remelting temperature of the brazed joint.
Typical application areas
Aircraft engine
Turbine blades, combustion chamber components, and high-temperature alloy structural parts—exhibiting excellent high-temperature strength and thermal fatigue resistance.
Gas turbine
Brazing of high-temperature pipelines and heat exchangers; resistant to high-temperature oxidation and creep.
Energy equipment
Nuclear industry components, chemical equipment, and offshore engineering structures—resistant to acids, alkalis, and seawater corrosion.
Vacuum electronic device
Sensor hermetic packaging, vacuum tube assemblies, and the low vapor pressure characteristics of nickel.
Automotive industry
Turbochargers and exhaust system components exhibit high joint strength retention at elevated temperatures.
Stainless steel/cemented carbide brazing
Stainless steel structural components, cemented carbide cutting tools/wear-resistant parts joints, corrosion- and oxidation-resistant.
Additive manufacturing
SLM and EBM: High sphericity ensures uniform powder spreading.
BNi-1 vs. Relevant Nickel-Based Brazing Alloys
| Grade | Key Features | Solidus/Liquidus (°C) | Typical Applications |
|---|---|---|---|
| BNi-1 | High chromium content, excellent high-temperature strength, and diffusion brazing characteristics. | 977 / 1038 | Superalloys, turbine blades, stainless steel |
| BNi-2 | Universal type, good liquidity | 971 / 999 | Universal Brazing for Stainless Steel and High-Temperature Alloys |
| BNi-3 | Low chromium, excellent fluidity | 982 / 1038 | Thin sections, narrow-gap joints |
| BNi-5 | Ultra-high chromium, with the best heat resistance. | 1079 / 1135 | Ultra-high-temperature service components |
| BNi-7 | Boron-free, suitable for the nuclear industry. | 877 / 877 | Nuclear field, thin stainless steel components |
BNi-1 exhibits a high chromium content and superior high‑temperature strength, making it particularly well suited for joining components that experience substantial stresses at elevated temperatures. Its diffusion brazing characteristics enable the joint to operate at service temperatures close to those of the base material.
Form Selection and Process Guidelines
| Form | Applicable Scenarios | Key Tips |
|---|---|---|
| Powder | Vacuum brazing pre-placed powder, automatic powder feeding | High sphericity and excellent flowability, suitable for mass production. |
| Paste-like | Dispensing, printing, manual coating | Ready to use out of the box, with precise control over solder paste volume and coating for complex geometries. |
* Prior to brazing, the base metal surfaces must be thoroughly cleaned to remove oil, grease, and oxide scale. After brazing, a subsequent heat treatment may be performed as needed to optimize joint performance.
End-to-end testing capability
Each batch of BNi‑1 powder and solder paste is tested for major elements (Ni, Cr, B, Si, Fe, C), impurities (P, S, Co, Al), oxygen content, particle size distribution, flowability, and both loose‑packed and tapped densities. Full‑batch traceable COA reports are provided, compliant with AWS A5.8 and AMS 4775 standards.
Packaging & Delivery
Powder packaging
Vacuum-sealed in a double-layer aluminum foil pouch (to prevent oxidation), with an outer iron or plastic drum.
Specifications: 1 kg, 5 kg, 10 kg, 20 kg, 25 kg, 50 kg per drum
Solder paste packaging
Syringes (10 cc/30 cc/50 cc) or plastic containers (100 g/500 g/1 kg)
Refrigerate; shelf life: 6 months.
Export packaging
Export orders are packed in wooden crates or palletized and reinforced to protect against moisture and impact.
Compatible with sea, air, and international express shipping.
Delivery time
Standard particle size in stock; ships within 3–7 days after order confirmation.
Solder paste customization or particle size fine-tuning: 5–10 days
Batch Traceability
For each batch, a sample is retained, and the COA report is shipped with the goods.
Supports third-party testing (e.g., SGS)
Free sample
Free samples are provided for process validation.
Small-batch samples; bulk supply upon quality confirmation.
Customized Services
Particle size customization, solder paste viscosity adjustment
Meets special operating conditions and equipment requirements
Technical Support
Providing vacuum brazing process parameters and solder paste application guidelines.
Assist in resolving issues encountered during use.
Inquire Now for Free Samples
Fill out the form on the right or contact us directly; we will provide product samples, technical data sheets, and price quotes to help you quickly complete your additive manufacturing process validation.
Address: No.39, Liandong Yougu lnd. Park, Bachelor Street,Changsha City,Hunan Province, China.