Other materials
3D Printing、MIM、HIP、Brazing、Spraying、Porous material、PM
TC4
Features:
Gas atomization process, spherical powder, low oxygen content, uniform particle distribution, high apparent density, good flowability
Application:
MIM Metal Injection Molding
HIP Hot Isostatic Pressing
Laser Cladding
PM Powder Metallurgy
Packing:
Precision grinding, intelligent manufacturing technology, integrated solutions
Aluminum foil bag, iron drum, plastic drum, woven bag, pallet, customized packaging
Date of delivery:
Precision grinding, intelligent manufacturing technology, integrated solutions
3-15 days
key word:
Code：TC4
- TC4（GB/T） - TiAl6V4（ISO） - Grade F5（ASTM）
- BT6（TOCT） - TA6V（NF） - TiAl6V4（DIN）
- YATB640（JIS）
Application of titanium alloy powder in MIM
1. Aerospace field
Titanium alloy parts, such as engine blades, structural brackets, connectors
2. Medical equipment field
Titanium alloy medical parts, such as surgical knife handles, scissors, tweezers, orthopedic joint parts, dental implants
3. High-end manufacturing field
Precision instruments, automotive industry, such as automotive turbocharger parts, internal combustion engines, gas turbine rotating and vibrating parts
4. Consumer electronics field
For example: MIM parts such as power interface, card tray, camera ring, buttons, etc.
Chemical composition（wt%）
|
Code |
Al |
V |
other≯ |
Ti |
||||
|
Fe |
C |
N |
H |
O |
||||
|
TC4 |
5.5-6.75 |
3.5-4.5 |
0.3 |
0.08 |
0.05 |
0.015 |
0.2 |
Bal. |
Physical indicators
|
粉末规格 Particle Size |
松装密度（g/cm³） Tapping Density |
霍尔流速（s/50g） Hall flow rate |
氧含量 （ppm） |
粒度分布（μm） Particle Size Distribution |
||
|
|
|
|
|
D10 |
D50 |
D90 |
|
0-15μm |
≥2.1 |
- |
800-1600 |
≥4.0 |
6.0-12.0 |
≤20.0 |
|
15-53μm |
≥2.4 |
≤40 |
800-1600 |
≥17.0 |
30.0-40.0 |
≤58.0 |
|
53-105μm |
≥2.5 |
≤40 |
800-1600 |
≥55.0 |
70.0-80.0 |
≤120.0 |
|
105-150μm |
≥2.4 |
≤40 |
800-1600 |
≥108.0 |
125.0-135.0 |
≤158.0 |
Application areas
Chemical Industry
Excellent corrosion resistance and good biocompatibility properties
Medical Equipment
The use of laser molding technology to produce titanium porous and dense biomedical materials is time and cost efficient, achieving customized design and processing, meeting customized demand for medical materials
Shipbuilding and Marine manufacturing
Light weight, high strength and good corrosion resistance properties. Used in pressure hull, valve, pump, screw and propeller shaft, engine parts, etc.
Aerospace
Properties of high specific strength, corrosion resistance, excellent bio compatibility
Recommend products
Gas atomization process, high density, high purity, good flowability, uniform particle distribution
View Details
The carbon and boron in BNi-1 brazing filler metal can diffuse into the base material during the brazing process, thereby increasing the remelting temperature of the brazed joint. This filler metal has a high chromium content, so the brazed joint exhibits good high-temperature performance and is suitable for components subjected to high stress at elevated temperatures.
View Details
BNi-2 is one of the most widely used nickel-based brazing alloys, characterized by a low melting temperature, good wettability, and fluidity. During the brazing process, the base material grains do not grow, which helps prevent deterioration of component performance.
View Details
BNi-5 brazing filler metal does not contain boron, significantly reducing its effect compared to the base material. It is suitable for brazing thin parts. This filler metal has a high melting temperature and brazing temperature. Due to its high chromium content, the joint's high-temperature strength and oxidation resistance are comparable to BNi-1.
View DetailsMaybe you want to know something else.
Contact Us
Address: No.39, Liandong Yougu lnd. Park, Bachelor Street,Changsha City,Hunan Province, China.
