Aluminum-based
Aluminum alloy and its composite materials with low density, high specific strength, corrosion resistance and easy surface treatment, etc., is a cost-effective lightweight materials, in recent years, the market demand is strong, the application and development of aluminum alloy powder materials is on the rise.
5083
Features:
Gas atomization process, spherical powder, low oxygen content, uniform particle size, super fine powder, high density, good liquidity
Application:
HIP (Hot isostatic pressing)
SLS (laser powder sintering)
SLM ( Selective laser melting)
Spraying
PM (powder metallurgy)
Packing:
Aluminum foil bag, iron drum, plastic drum, woven bag, pallet, customized packaging
Date of delivery:
Precision grinding, intelligent manufacturing technology, integrated solutions
3-15 days
key word:
Code：5083
- 5083、LF4（GB）
- 5083（AA）
- A5083（JIS）
Chemical composition（wt%）
|
Code |
Mg |
Mn |
Cr |
≯ |
other≯ |
Al |
|||||
|
|
|
|
|
Si |
Fe |
Cu |
Zn |
Ti |
single |
total |
|
|
5083 |
4.0-4.9 |
0.4-1.0 |
0.05-0.25 |
0.4 |
0.4 |
0.1 |
0.25 |
0.15 |
0.05 |
0.15 |
Bal. |
Physical indicators
|
牌号 Code |
主要规格（μm） Specification（μm） |
氧含量（ppm） Oxygen Content （ppm） |
|
5083 |
48-150 |
≤800 |
|
|
25-45 |
≤1000 |
|
|
＜10 |
≤1200 |
Application areas
Aerospace
It has the characteristics of lightweight and high intensity which can effectively reduce the weight of the aircraft and improve the flight efficiency
Rail vehicle
It is widely used in the outer board, the roof plate, the ripple pattern, the car body, the reinforcement board, the side wall plate and the end wall plate of the high -speed trains , Emperor component, bottom architecture, skeleton and other structures for it has high strength, high plasticity, corrosion resistance and easy processing
Bull construction
it can eliminate the tendency of peeling and corrosion and stress corrosion for it has high intensity and excellent corrosion resistance and welding
Recommend products
Gas atomization process, spherical powder, low oxygen content, uniform particle distribution, ultra-fine powder, low density, good flowability
View Details
1. Excellent ductility in the annealed state 2. Excellent weldability 3. High fatigue strength 4. Good corrosion resistance 5. Excellent printability and surface finish 6. Good thermal and electrical conductivity, non-magnetic, low-temperature resistant 7. Non-magnetic
View Details
1.Lightweight and high-strength: Low density (approximately 2.68 g/cm³), balanced strength and toughness. 2.Heat-resistant and fatigue-resistant: Maintains good mechanical properties at high temperatures, suitable for heat dissipation structural components. 3.Excellent formability: High sphericity powder, good fluidity, printed part density ≥99%. 4.Simple post-processing: Supports secondary processing such as heat treatment, machining and surface polishing. 5.Environmentally friendly and safe: Complies with industrial environmental protection standards and releases no toxic substances.
View Details
1. Excellent fluidity and processability in additive manufacturing systems 2. High strength-to-weight ratio, suitable for lightweight component production 3. Good thermal conductivity, low coefficient of thermal expansion 3. Good mechanical properties, including high stiffness and wear resistance 4. Cost-effective production due to reduced material waste and shorter lead times 5. Flexible creation of complex geometries and internal structures
View DetailsMaybe you want to know something else.
Contact Us
Address: No.39, Liandong Yougu lnd. Park, Bachelor Street,Changsha City,Hunan Province, China.
