【 Characteristic】

- Brazing joints have higher strength and better corrosion and heat resistance than silver

 and aluminum base brazing joints, especially in salt spray environments, nitric and sulfuric acids

- Mainly used in metal and non-metal connection

- Active elements have good wettability to ceramics, graphite and other non-metals, 

without metallization; After the active filler metal is melted, the active element interacts with the 

ceramic and metal base metal to undergo chemical reaction or dissolution, so as to wet the surface 

of the ceramic and connect the ceramic with the connected metal through the generated reaction 

product, so as to realize the reliable connection between the ceramic and metal

【 Application】

- Widely used in vacuum environment brazing (vacuum brazing),

Diamond brazing (PCD polycrystalline diamond),

Boron nitride brazing (CBN cubic boron nitride),

Ceramic brazing (silicon nitride, aluminum nitride, alumina ceramics),

Titanium and titanium alloy brazing,

Refractory metal brazing,

Graphite brazing,

Can cut alloy brazing, etc